3D Printing & Scale Models

3D printed scale models of your machines and plants

A physical model you can put on an exhibition table, a boardroom desk or a client's shelf — printed from your CAD, finished in your colours and sealed in an acrylic display case.

Machine modelsCut-section modelsPlant layout modelsQR-linked to your 3D animation
3D printed scale model of a process vessel skid with platform in an acrylic display case
07Client models
shown below

The exhibit hall

Seven models, each one a client's machine or plant

Built from the same CAD we use for animations and renders. Filter by type, then open any model full size.

All modelsMachine models (2)Cut-section models (2)Plant & layout models (3)
3D printed scale model: cogeneration & power plant layout model
Plant & layout modelCogeneration & Power Plant Layout Model

Solar field, wind turbine, substation and plant buildings modelled on a landscaped base.

3D printed scale model: api-674 water injection pump unit
Machine modelAPI-674 Water Injection Pump Unit

Reciprocating pump, gearbox and motor on a common base, with the unit named on the plaque.

3D printed scale model: progressive cavity pump — cut-section
Cut-section modelProgressive Cavity Pump — Cut-Section

The rotor and stator exposed along their length, so a buyer can see how the pump actually moves fluid.

3D printed scale model: process vessel skid with platform
Plant & layout modelProcess Vessel Skid with Platform

Three jacketed stainless vessels, pipework, handrails and access stair on a single skid.

3D printed scale model: hydraulic actuator — cut-section
Cut-section modelHydraulic Actuator — Cut-Section

Half the housing removed to show the spring, piston and seals in colour-coded detail.

3D printed scale model: hose crimping machine
Machine modelHose Crimping Machine

A compact machine reproduced with its control panel, die head and branded cabinet.

3D printed scale model: bottling plant layout model
Plant & layout modelBottling Plant Layout Model

Storage tanks, pumps, process blocks and the filling hall laid out as the plant will be built.

Why a physical model

Some conversations go better with something on the table

Screens are everywhere at an exhibition. A well-made model of your machine is the thing visitors walk over to and pick up.

01

Bring the machine to the stand

A 10-tonne machine does not travel to an exhibition. A scale model of it does, and it draws people to the stand.

02

Show what is inside

Cut-section models open up pumps, actuators and valves so a buyer sees the working parts, not just the casing.

03

Explain a whole plant at a glance

Layout models put tanks, process blocks and buildings on one table for approvals and investor meetings.

04

Leave something on the desk

A model in an acrylic case stays in the client's office long after the meeting — a reminder of your machine every day.

From CAD to display case

How a scale model gets made

The same 3D model that drives your renders and animations is the starting point, so the printed model matches what your buyers see on screen.

01

Scale the CAD

Your 3D model is scaled down and the fine details are simplified so the model prints cleanly and still reads as your machine.

02

Print the parts

The model is printed in sections so each part can be finished properly before assembly.

03

Finish and paint

Parts are cleaned, finished and painted in your equipment colours, with nameplates and decals.

04

Mount and case

Assembled on a display base with a name plaque, inside a clear acrylic case ready for the stand or the boardroom.

Cut-section 3D printed model of a hydraulic actuator showing the spring and piston
Scan the plaque.
Watch it work.

Physical meets digital

A model that opens your 3D animation

Add a QR code to the plaque and the model becomes a doorway: visitors scan it and the machine's animation, 360 view or virtual tour opens on their phone.

Questions buyers ask

3D printed scale models — FAQs

What is a 3D printed scale model used for?

Mostly for places where the real machine cannot go: exhibition stands, boardroom presentations, client visits and project approvals. A scale model on the table explains a machine or a plant layout faster than a brochure, and it stays on the client's desk afterwards.

Can you make a model from my CAD files?

Yes. We start from your 3D CAD or general arrangement drawings, scale the design down and simplify the details that would be too fine to print, while keeping the proportions and the features your buyers recognise.

What is a cut-section model?

A model with part of the housing removed so the inside is visible — the rotor and stator of a progressive cavity pump, or the spring and piston of a hydraulic actuator. It shows a buyer how the equipment works without opening a real one.

Can you model a full plant layout, not just one machine?

Yes. Plant layout models show tanks, process blocks, pipe routes, buildings and the site around them on one base, which makes them useful for approvals, investor meetings and project kick-offs.

How is the model finished and displayed?

Models are finished and painted in your equipment's colours, mounted on a display base with a name plaque, and closed in a clear acrylic case so they travel to exhibitions and stay dust-free.

Can the model link to a 3D animation or 360 view?

Yes. A QR code on the plaque can open the machine's 3D animation, 360 product viewer or virtual tour on the visitor's phone, so the physical model leads straight into the digital one.

Next step

Which machine should be on your stand next?

Send us the CAD or GA drawing and tell us where the model will be shown. We will suggest the scale, the level of detail and whether a cut-section tells the story better.